Fix a Leak

Beschreibung

Fix-a-leak is a blended, concentrated material designed to seal leaks in virtually any material. Seals holes up to 3 mm in diameter. Forms a permanent seal.

Application note
Shake well before use. Mark the water level before use.

1. Remove all cartridge filters before adding FIX-A-LEAK to the water. Set the sand filter valve to circulate.
2. Add FIX-A-LEAK slowly via the skimmer or in front of a suction opening while the pump is running.
3. FIX-A-LEAK must be circulated continuously for at least 4-6 hours per day, possibly for up to 2 days or until you have determined that the leak is closed.
4. The product is very heavy and settles quickly at the lowest point. It must be stirred again every 2-3 hours during circulation.

After the leak has been successfully sealed and an appropriate curing time (24-48 hours) has elapsed, you can return to normal filtration.